The Sonel EVSE-01 Adapter allows you to perform comprehensive measurements of electric vehicle charging stations, both quickly and in accordance with the applicable regulations.
By simulating the charging cable (proximity pilot line – PP) and vehicle connection status (control pilot line – CP), the adapter will put the EV station into different operating states.
This will enable measurements in the field of electric shock protection:
- ZS fault loop impedance
- RISO insulation resistance
- Checking the parameters of RCD residual current devices.
- MPI-540/MPI-540-PV tests the following RCD devices
- To facilitate the diagnostics, one of the EVSE-01 sockets is provided with pulse width modulation signal (PWM).
The EVSE-01 adapter enables measurements of AC electric vehicle charging stations with type 2 connector. Tests for 1-phase and 3-phase stations are available – both with
and without ventilation.