Sonel

The Sonel MIC-10 is a 1kV insulation resistance meter with test ranges at 50V, 100V, 250V, 500V, 1000V. Measurement of alternating and direct voltages in the 0V...600V range is also possible. Low voltage circuit continuity and resistance measurement in accordance with the 61557 standard.

View Cart

Details

Sonel MIC-30

The Sonle MIC-30 is a 1kV insulation test meter with a variable voltage measurement range of 50V...1000V in 10V steps. The continuity measurement of protective and equipotential conductors is according to EN 61557-4 with the >200 mA current. The meter can made low voltage circuit continuity and resistance measurements, leakage

View Cart

Details

Sonel MIC-2501

The Sonel MIC-2501 is a 2.5kV insulation tester with a variable voltage range of 100V...2500V in 100V steps. Continuity measurement of protective and equipotential conductors is made in accordance to EN 61557-4 with the >200 mA current.

View Cart

Details

Sonel MIC-5001

The Sonel MIC-5001 insulation resistance meter can make measurements up to 5kV with either the two or three-lead measurement method. Ramp test insulation measurement is possible along with measurement of breakdown voltage. Measurement of alternating and direct voltages can also be made in the 0...750 V range.

View Cart

Details

Sonel MIC-5005

The Sonel MIC-5005 5kV insulation resistance meter has a range up to 15T Ohm in Accordance with IEC 61557-2 with automatic discharge of measured object capacitance voltage after the end of insulation resistance measurement. Metered T , T and T test times for measuring one or two absorption coefficients from

View Cart

Details

Sonel MIC-5010

Insulation resistance measurement of 5kV with a resistance range of up to 15T Ohm in Accordance with IEC 61557-2. The test voltages can be programmed at 50V…1000 V at 10 V and 1000V...5000 V at 25 V resolution. During tests the meter can give a continuous indication of measured insulation

View Cart

Details

Sonel MIC-5050

The Sonel MIC-5050 5kV insulation resistance measurement can make measurements in the range of 50...5000 V (50...1000 V at 10 V and 1...5 kV at 25 V) at up to 20 TΩ. The meter is suitable for high noise environments due to the use of a digital filters function. Continuity

View Cart

Details

Sonel MIC-10k1

The Sonel MIC-10k1 is a 10KV insulation resistance meter with a measurement range up to 40 TΩ. The measurement voltage can be set in the range of 50…10000 V (50...1000 V at 10 V and 1...10 kV at 25 V) with digital filters for measurements in high noise environment.

View Cart

Details

Sonel MRU-21

The Sonel MRU-21 is a 3-pole earth resistance meter capable of the measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with a test current of 200mA. Resistance measurement is also possible using the 2-pole method.

View Cart

Details

Sonel MRU-30

The Sonel MRU-30 earth resistance meter has both 3-pole, 4-pole methods. The selective earth resistance measurement can be made with clamp so no influence from parallel earths and no opening of rusty junctions is needed.

View Cart

Details

Sonel MRU-120

The Sonel MRU-120 is able to make the following measurements. Earth resistance measurement with 3-pole,4-pole method. Selective earth resistance measurement with clamp. Continuity of equipotential bondings and protecting conductors. Two clamps earth resistance measurement without auxiliary test probes. Earth resistivity measurement.

Sonel MMR-650

Sonel MIC-10

Sonel MIC-30

Sonel MIC-2501

Sonel MIC-5001

Sonel MIC-5005

Sonel MIC-5010

Sonel MIC-5050

Sonel MIC-10k1

Sonel MRU-21

Sonel MRU-30

Sonel MRU-120

Title